标准体系的比例型寿命使用期模型与分析

本文在基于标准被废除按比例进行时的标准体系使用期的两个新模型。首先给出了模型假设条件,然后定义了标准使用期。根据假设给出了两个模型条件下的标准使用期公式,最后通过数值示例说明了标准使用期的公式使用。     

Development of a “Built-in” Scanning Near Field Microscope Head for an Atomic Force Microscope System and Stress Mapping of an Al2O3/ZrO2 Eutectic Composite

We constructed a scanning near-field optical microscope (SNOM) on a commercially available atomic force microscopy (AFM) apparatus (SPM-9500J2; Shimadzu Corp.) to measure the stress distribution in ceramic composite materials. Features of our SNOM system are: (1) a compact SNOM head substituted for the original AFM head; (2) a wide scanning range (125 × 125 μm²) inherited from the original scanner; (3) use of conventional shear-force regulation; (4) an optical system for the illumination-collection (I-C) mode; (5) excitation by a 488 nm line of an Ar-ion laser, and (6) light detection by photon counting or a polychromator equipped with an electronically cooled charge coupled device (CCD). This SNOM system was used to measure the surface structure and stress distribution of an Al₂O₃/ZrO₂ eutectic composite. We simultaneously measured topographic images and fluorescence spectra of an Al₂O₃/ZrO₂ eutectic composite. We estimated its peak intensity, peak position, and peak width from the fluorescence spectrum during scanning, which respectively correspond to the abundance of Al₂O₃, stress in the grain, and the anisotropy of that stress. Mapping images showed that the stress and its anisotropy were weaker in the center of the Al₂O₃ grain than its boundary between Al₂O₃ and ZrO₂. That observation suggests that Al₂O₃ underwent intense anisotropic stress induced by volume expansion in the phase transition of ZrO₂ from the cubic phase to the monoclinic phase during preparation.     

Effect of maltodextrins on the surface activity of small-molecule surfactants

We report on the effect of commercially important polysaccharides (maltodextrins with variable dextrose equivalent (Paselli SA-2, MD-6 and MD-10) on the surface activity at the air–water interface of small-molecule surfactants (sms), possessing different hydrophobic–lipophilic balance ((SSL (Na⁺), the main component is a sodium salt of stearol–lactoyl lactic acid, and PGE (080), polyglycerol ester of C18 fatty acid), and widely used in food products. A marked change of the surface activity of sms was found in the presence of maltodextrins by tensiometry. The combined data of laser multiangle light scattering and mixing calorimetry have suggested that this result is governed by specific complex formation between maltodextrins and sms in aqueous medium. Measurements have been made of the molar mass, the second virial coefficient and the enthalpy of intermolecular interactions in aqueous solutions. The implication of a degree of polymerization of maltodextrins in this phenomenon was shown. The interrelation between the molecular parameters of the formed complexes and their surface activity at the air–water interface has been revealed and discussed.     

Delay-dependent stochastic stability of delayed Hopfield neural networks with Markovian jump parameters

In this paper, the problem of stochastic stability for a class of time-delay Hopfield neural networks with Markovian jump parameters is investigated. The jumping parameters are modeled as a continuous-time, discrete-state Markov process. Without assuming the boundedness, monotonicity and differentiability of the activation functions, some results for delay-dependent stochastic stability criteria for the Markovian jumping Hopfield neural networks (MJDHNNs) with time-delay are developed. We establish that the sufficient conditions can be essentially solved in terms of linear matrix inequalities.     

Modeling hyperelastic behavior of rubber: A novel invariant‐based and a review of constitutive models

A constitutive phenomenological model completing the Gent‐Thomas concept is carried out to formulate laws governing the hyperelastic behavior of incompressible rubber materials. It is shown that the phenomenological Gent‐Thomas model (1958) and the constrained chain model (1992) give similar precise results at small to moderate deformation. On the other hand, comparisons of the outcome of the proposed model with that of the molecular model from the combined concepts of Flory‐Erman and Boyce‐Arruda (2000), and with those of the phenomenological models of Ogden (1982), Yeoh‐Fleming (1997), Pucci‐Saccomandi (2002) and Beda (2005) are made. Residual inconveniences raised by attractive continuum models in rubber elasticity literature have been successfully overcome. Results from both the statistical and phenomenological mechanics concepts are compared with the data of some useful classical materials (rubbers of Treloar, Rivlin‐Saunders, Pak‐Flory and Yeoh‐Fleming). The results permit one to see salient equivalence of the two theories for a more reliable prediction of stress‐stretch response for all states of any mode of deformation. A complete and exhaustive analysis of the Mooney plot that combines small and very large extension‐compression has been quite essential in assessing the validity of models. A method of identification of material parameters is presented and data of the simple tension suffice for the determination of the parameter values. It is shown that the ordinary identification procedures, such as the usual least squares, a very much used numerical method in materials investigation, can be unsuitable in some cases of hyperelastic modeling. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1713–1732, 2007     

Fitting the control parameters of a genetic algorithm: An application to technical trading systems design

This paper studies the problem of how changes in the design of the genetic algorithm (GA) have an effect on the results obtained in real-life applications. In this study, focused on the application of a GA to the tuning of technical trading rules in the context of financial markets, our tentative thesis is that the GA is robust with respect to design changes. The optimization of technical trading systems is a suitable area for the application of the GA metaheuristic, as the complexity of the problem grows exponentially as new technical rules are added to the system and as the answer time is crucial when applying the system to real-time data. Up to now, most of GAs applications to this subject obviated the question of possible “design dependence” in their results. The data we report, based on our experiments, do not allow us to refute the hypothesis of robustness of the GA to design implementation, when applying to technical trading systems tuning.     

一类三参数混沌动力学系统模型及其在经济增长研究中的应用

从非线性自回归模型Xt+1=-αXtλ+1+βXt+γ出发,通过变量替换Xt=aYt,推出三参数混沌动力学系统模型Yt+1=kYt(1-Ytλ)+c;采用线性回归与非线性回归相结合的改进的混合法,对模型参数作了估计;实际研究表明,该模型可以用于对国内生产总值GDP增长的研究.     

Corrected mirror systems with double reflection

We propose objectives consisting of two mirrors with central holes for passage of a light beam. The optical layout ensures multiple reflection of rays from both mirrors. We consider several approaches to calculating the design parameters for which three and four aberrations do not occur. The objectives can be used in optical devices operating in the UV and IR regions of the spectrum. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 74, No. 2, pp. 267–270, March–April, 2007.     

Electrochemical reduction of sodium metavanadate in an equimolar KCl-NaCl melt

Electrochemical reduction of sodium metavanadate in an equimolar KCl-NaCl melt and the effect of acid-base properties of environment on this process are studied by a voltammetry method on a stationary platinum electrode. It is established that the limiting current of the NaVO₃ electroreduction process has a kinetic nature. The process proceeds via an autoinhibition scheme and its rate is limited by an acid-base reaction conjugated with an irreversible charge transfer reaction. A substantial role of cationic composition of the melt is revealed experimentally. Following acidification of the KCl-NaCl-NaVO₃ melt by Mg²⁺ (from MgCl₂), the process passes from an irreversible kinetic regime into a reversible diffusion (quasi-diffusion) process. Values of stability constants for vanadates produced with the aid of acid-base titration of vanadium pentoxide by oxygen ions in experimental conditions are presented. These values are taken into account when calculating kinetic parameters of the NaVO₃ electroreduction.